top of page
DuPont® Comparable
FEATURES:
This product is intended for use as a direct
replacement for a major paint manufacturer's
product. Use according to paint manufacturer's
mixing recommendations. Packaged in gallons only.
• Used identically as their couterparts in ration
equivalency and application.
TECH TIPS:
• Basecoat Binder and Balancer products MUST be sealed after each use to prevent moisture and contaminants
from entering.
• To avoid applying kicked out basecoat, it is
always good shop practice to spray a test panel
BALANCER: DI-150 (GALLON)
*DI-150 compares to DuPont® 150K.
BINDER: DI-175 (GALLON)
*DI-175 compares to DuPont® 175K.
PART NUMBER INFORMATION:
BINDER & BALANCER
INSTRUCTIONS:
• Agitate thoroughly before use.
• Refer to color manufacturers formulas for required amounts.
MIXING ROOM
BINDER & BALANCER
DuPont® Comparable
INSTRUCTIONS:
• Agitate thoroughly before use.
• Refer to color manufacturers formulas for required amounts.
FEATURES:
This product is intended for use as a direct
replacement for a major paint manufacturer's
product. Use according to paint manufacturer's
mixing recommendations. Packaged in gallons only.
• Used identically as their couterparts in ration
equivalency and application.
BALANCER: DI-3330 (GALLON)
*DI-3330 compares to DuPont® 62330F
BINDER: DI-3320 (GALLON)
*DI-3320 compares to DuPont® 62320F.
PART NUMBER INFORMATION:
TECH TIPS:
• Basecoat Binder and Balancer products MUST be sealed after each use to prevent moisture and contaminants
from entering.
• To avoid applying kicked out basecoat, it is
always good shop practice to spray a test panel
CONVERTER & BALANCER
PPG® Comparable
INSTRUCTIONS:
• Agitate thoroughly before use.
• Refer to color manufacturers formulas for required amounts.
FEATURES:
This product is intended for use as a direct
replacement for a major paint manufacturer's
product. Use according to paint manufacturer's
mixing recommendations. Packaged in gallons only.
• Used identically as their couterparts in ration
equivalency and application.
PART NUMBER INFORMATION:
BALANCER: DI-695 (GALLON)
*DI-695 compares to PPG® 1695.
CONVERTER: DI-689 (GALLON)
*DI-689 compares to PPG® 1689.
TECH TIPS:
• Basecoat Converter and Balancer products MUST be sealed after each use to prevent moisture and contaminants from entering.
• To avoid applying kicked out basecoat, it is always good shop practice to spray a test panel
CLEAR MIXING BASE
PPG® Comparable
INSTRUCTIONS:
• Agitate thoroughly before use. Use according to paint manufacturer’s mixing recommendations. Reseal after
each use. DI-649 Clear Mixing Base should be place on a mixing machine.
FEATURES:
This product is intended for use as a direct
replacement for a major paint manufacturer's
product. Use according to paint manufacturer's
recommendations. Packaged in gallons only.
• Comparable to PPG DMD 649 Clear Mixing
Base which are used in PPG DBC and DBU
basecoat systems
PART NUMBER INFORMATION:
CLEAR MIXING BASE: DI-649 (GALLON)
*• DI-649 compares to DMD 649 Clear Mixing Base which are used in PPG DBC and DBU basecoat systems
APPLICATION:
• Apply product according to paint manufacturer’s recommendations.
ACCELERATED REDUCER
This reducer decreases cure times and dry-to-sand times as much as 50% with no affect on pot-life and sprayability.
FEATURES:
• Slightly shortens useable potlife
• Used in temperatures 70°F (21.1°C) and below
INSTRUCTIONS:
• Shake thoroughly before mixing.
APPLICATION:
• Apply product according to label instructions.
MIXING:
• Mix clearcoat according to label instructions. Add at a rate of 5%. For 8ozs. of ready to spray material add 1 capful for 5%.
NOTE:
Should not be used in temperatures above 70°F (21.1°C). Do not use on overall paint jobs. Designed for 1-3 panel
repairs.
ACCELERATED REDUCER: DI-AR (QUART)
PART NUMBER INFORMATION:
FAST URETHANE REDUCER
INSTRUCTIONS:
• Follow paint or primer manufacturer’s directions for reduction ratios. Read all warnings and directions for safe usage and proper application.
• It is important to test the compatibility of this product with your paint system. When using solvents for cleanup, use proper precautionary measures for handling and follow all proper local disposal procedures and regulations.
FEATURES:
Reducer that can be used to dilute all water-free urethane based paints and primers. Allows
maximum pot life and improves flow and leveling
• Spot repair
• Ideal for use in cold temperatures 60°-70°F
(15°-21°C)
PART NUMBER INFORMATION:
GALLONS: URF-1
QUARTS: URF-4
5-GALLON: URF-5
MEDIUM URETHANE REDUCER
FEATURES:
Reducer that can be used to dilute all water-free
urethane based paints and primers.
• Single panel
• Ideal for use in cold temperatures 65°- 80°F
(18°-26°C)
PART NUMBER INFORMATION:
GALLONS: URM-1
QUARTS: URM-4
5-GALLON: URM-5
INSTRUCTIONS:
• Follow paint or primer manufacturer’s directions for reduction ratios. Read all warnings and directions for safe usage and proper application.
• It is important to test the compatibility of this product with your paint system. When using solvents for cleanup, use proper precautionary measures for handling and
follow all proper local disposal procedures and regulations.
SLOW URETHANE REDUCER
FEATURES:
Reducer that can be used to dilute all water-free urethane based paints and primers.
• Multi Panel
• Ideal for use in cold temperatures 75°-90° F
(24°-32°C)
PART NUMBER INFORMATION:
GALLONS: URS-1
QUARTS: URS-4
5-GALLON: URS-5
INSTRUCTIONS:
• Follow paint or primer manufacturer’s directions for reduction ratios. Read all warnings and directions for safe usage and proper application.
• It is important to test the compatibility of this product with your paint system. When using solvents for cleanup, use proper precautionary measures for handling and follow all proper local disposal procedures and regulations.
WET LOOK HARDENER
FEATURES:
A high solids formula designed to produce a
superior high gloss finish. “Wet Look” produces
advanced acrylic enamel finishes that dry faster
and harder. More chemically resistant than
conventional acrylic enamel hardeners.
• Super high-gloss finish
• High solids hardener provides durability for
exterior protection
• Converts acrylic enamel to urethane
PART NUMBER INFORMATION:
WET LOOK HARDENER: DI-WLH (PINTS & 1/4 PINTS)
MIX RATIO:
• Add a 1/4 Pint Wet Look Hardener to 1 Quart of acrylic enamel
• Add 1 Pint Wet Look Hardener to 1 Gallon
of acrylic enamel
TECHNICAL DATA:
• APPEARANCE: Light Yellow
• ODOR: Ketone odour
CLEAN UP:
• Clean spray equipment immediately following use
bottom of page