top of page
This product is a replacement for specific major paint manufacturer's products.
• For specific replacement information refer to cross reference sheet.
DISCLAIMERS:
• PPG, Deltron and Concept are registered trade names of PPG. PPG does not
manufacture, endorse or guarantee DI Products.
• Matrix is a registered trade mark name of Matrix System Automotive Finishes.
Matrix does not manufacture, endorse or guarantee DI Products.
• Sherwin Williams and Ultra 7000 is a registered trademark of The Sherwin
Williams Co. Sherwin Williams does not manufacturer, endorse, or guarantee
DI Products.
• DuPont and Chromabase Basecoat Colors is a registered trademark of
DuPont Co. DuPont does not manufacture, endorse, or guarantee
DI Products.
APPLICATION:
• Apply product according to paint manufacturer’s recommendations.
FINE BLUE: DI-870 (6oz)
FROST BLUE: DI-920 (6oz)
TINCTURE GOLD: DI-930 (6oz)
BRIGHT WHITE: DI-950 (6oz)
RUSSET: DI-960 (6oz)
FINE WHITE: DI-980 (6oz)
FINE RUSSET: DI-990 (6oz)
RADIANT RED: DI-100 (4oz)
CRYSTAL SILVER: DI-200 (4oz)
SUNBEAM GOLD: DI-300 (4oz)
GALAXY BLUE: DI-400 (4oz)
STELLAR GREEN: DI-500 (4oz)
SOLARIS RED: DI-600 (4oz)
FIRESIDE COPPER: DI-700 (4oz)
COSMIC TURQUOISE: DI-800 (4oz)
AMETHYST DREAM: DI-900 (4oz)
PART NUMBER INFORMATION:
POWDERED PEARLS
INSTRUCTIONS:
• Use according to paint manufacturers mixing recommendations.
• Reseal after each use.
COLOR
1:1 MIX | 6.2 VOC
FEATURES:
This product is a replacement for a specific paint manufacturer's product. Refer to cross reference information below.
• Comparable to PPG DMD 1683 and Matrix
MT-83 Black Basecoat
• Apply product according to paint manufacturer’s recommendation
BLACK BASECOAT
TECHNICAL INFORMATION:
Flash Time between coats: 5 minutes
Dust Free Time: 5 minutes
Tack Free Time: 5 minutes
Spray to coverage: 2-3 coats
Dry to sand time (air dry): 10-15 minutes
Time to recoat basecoat: 10-15 minutes
Time to topcoat clearcoat: 25-30 minutes
Gun Set-up: 1.3mm-1.4mm tip
Air Pressure: @ 40-45 psi
REDUCERS:
Reduces 1:1 (100%) with Urethane Reducers
INSTRUCTIONS:
• Agitate thoroughly before use. Use according to paint manufacturers mixing recommendations. Reseal after each use. Should be placed on a mixing machine.
BLACK BASECOAT: DI-83 (GALLON)
PART NUMBER INFORMATION:
WHITE BASECOAT
1:1 MIX | 5.2 VOC
FEATURES:
This product is a replacement for a specific paint manufacturer's product. Refer to cross reference information below.
• Comparable to PPG DMD 1684 and Matrix
MT-84 White Basecoat
• Apply product according to paint manufacturer’s recommendation
TECHNICAL INFORMATION:
Flash Time between coats: 5 minutes
Dust Free Time: 5 minutes
Tack Free Time: 5 minutes
Spray to coverage: 2-3 coats
Dry to sand time (air dry): 10-15 minutes
Time to recoat basecoat: 10-15 minutes
Time to topcoat clearcoat: 25-30 minutes
Gun Set-up: 1.3mm-1.4mm tip
Air Pressure: @ 40-45 psi
REDUCERS:
Reduces 1:1 (100%) with Urethane Reducers
INSTRUCTIONS:
• Agitate thoroughly before use. Use according to paint manufacturers mixing recommendations. Reseal after each use. Should be placed on a mixing machine.
PART NUMBER INFORMATION:
2.98 VOC
FEATURES:
This product is a replacement for a specific paint manufacturer's product. Refer to cross reference information below.
• Comparable to DuPont® 806J
• Apply product according to paint manufacturer’s
recommendation
REDUCERS:
Mix accoring to DuPont® recommendations
INSTRUCTIONS:
• Agitate thoroughly before use. Use according to paint manufacturers mixing recommendations. Reseal after each use. Should be placed on a mixing machine.
HS BLACK TONER: DI-806 (GALLON)
WHITE BASECOAT:DI-84 (GALLON)
TECHNICAL INFORMATION:
Flash Time between coats: 5 minutes
Dust Free Time: 5 minutes
Tack Free Time: 5 minutes
Spray to coverage: 2-3 coats
Dry to sand time (air dry): 10-15 minutes
Time to recoat basecoat: 10-15 minutes
Time to topcoat clearcoat: 25-30 minutes
Gun Set-up: 1.3mm-1.4mm tip
Air Pressure: @ 40-45 psi
HS BLACK TONER
PART NUMBER INFORMATION:
HS WHITE TONER
3.88 VOC
FEATURES:
This product is a replacement for a specific paint manufacturer's product. Refer to cross reference information below.
• Comparable to DuPont® 801J
• Apply product according to paint manufacturer’s
recommendation
TECHNICAL INFORMATION:
Flash Time between coats: 5 minutes
Dust Free Time: 5 minutes
Tack Free Time: 5 minutes
Spray to coverage: 2-3 coats
Dry to sand time (air dry): 10-15 minutes
Time to recoat basecoat: 10-15 minutes
Time to topcoat clearcoat: 25-30 minutes
Gun Set-up: 1.3mm-1.4mm tip
Air Pressure: @ 40-45 psi
REDUCERS:
Mix accoring to DuPont® recommendations
INSTRUCTIONS:
• Agitate thoroughly before use. Use according to paint manufacturers mixing recommendations. Reseal after each use. Should be placed on a mixing machine.
PART NUMBER INFORMATION:
HS WHITE TONER: DI-801 (GALLON)
bottom of page